camotif

This kit was designed to be an almost 100% plug-n-play harness for the install and proper operation of the #JDM kouki #AE86 front bumper...

To read the rest of the article, pick up a copy of 86 Garage Magazine's Issue No. 5

Recently worked on a friend's refreshed 4A-GE sporting a pair of Mikuni 44PHH carbs. While dialing her in, in between the test jaunts...

So I'm performing my regular startup and warmup routine on the 86s and when I get to the "Tanuki", she won't turn over. My first...

To read the rest of the article, pick up a copy of 86 Garage Magazine's Issue No. 2

Get a copy of Issue No. 1 of 86 Garage Magazine for more articles and information.

For those of you foolish enough (to others you are a wicked blasphemer) to go exploring in the old forest of carburetion, hunched over...

A quick update on the Raspberry Pi Digital Cluster Project - finally got her installed in Law's Levin Hatch. The install was all very...

A few weekends ago, while giving the cars their usual start & warm up, I decided to take a manometer to each of the carb stacks on the...

Previously, I had completed a prototype and fully functional custom gauge cluster that fit neatly in the factory cluster location and...

I've been working off and on with a good friend's project for a couple of years now. With all the wiring pulled, she's finally at the...

For all of the fellow die-hard, stubborn 4AG brethren, you're familiar with grabbing a large screwdriver, pry-bar, etc...wedged between...

If you've converted the front end of your non JDM AE86 to the JDM kouki front bumper w/ Turn Indicator Lamps, then you may be one of...

What important differences do YOU see between the 3 different heads in the following images and why do you find them important? Image A -...